Drain and supply pipes in a basement with blue PEX lines
Home › Services › Plumbing Installation
24/7 Emergency Line Open

Plumbing Installation in Marlboro, NJ

Plan plumbing before the walls close. We install fixtures, lines and drains for Marlboro remodels and additions.

Built for inspectionClear price firstOpen 24/7
24/7 emergency line
(732) 466-1098Call now

Plumbing installation covers new fixtures, new lines and the plumbing for a remodel or addition. We install sinks, toilets, showers, laundry connections, water lines and drains for Marlboro homes, and we plan the work so it passes inspection and works from the first day.

If you are renovating a kitchen or bath, adding a bathroom or finishing a basement, start here.

What we install

Fixtures

Sinks, toilets, tubs, showers, faucets and the shutoff valves behind them.

Supply and drain lines

New water lines and drains for bathrooms, laundry rooms and kitchens.

Remodel plumbing

Moving a sink, adding an island sink or relocating a laundry hookup.

Basement and addition work

Rough in plumbing for a basement bathroom or a new addition.

Planning a project

Good plumbing starts before the walls close. We look at where the water supply and drain stack are, where the fixture needs to go and how the drain will slope to reach the stack.

Drains rely on gravity, so a basement bathroom often needs a sewage ejector pump or a break in the slab to connect. We explain the options early so the budget includes them.

Permits and inspections

Plumbing work in Marlboro Township is reviewed by the Construction Division. The township's guidance says plumbing is reviewed before a Certificate of Occupancy and that a final inspection is required. New Jersey's plumbing subcode, N.J.A.C. 5:23-3.15, adopts the National Standard Plumbing Code as its model code.

The page does not spell out which small jobs are exempt, so permit rules vary. Ask the division at (732) 536-0200, extension 1800, and we will tell you what we have seen required on similar jobs.

ProjectCommon plumbing needsPlan ahead for
Kitchen remodelSink, faucet, disposal, dishwasher and sometimes a pot fillerSupply and drain locations before cabinets
Bathroom remodelToilet, vanity, shower or tub, shutoffsVenting and drain slope
Basement bathroomRough in, drains and often an ejector pumpBelow slab drains or pumped drainage
Laundry roomSupply, drain and shutoffsA drain sized for the washer

Gas smell? Safety comes first

If you smell gas, leave the building right away and call your gas utility or 911 from outside. Do not use switches or phones inside, and do not call a plumber first. Gas line work, such as connecting a range or a dryer, must be done to code and often requires a permit and inspection, so ask the Construction Division before starting.

Planning a remodel or new fixture?

Call and we will schedule a time to look at the space.

Call (732) 466-1098

What affects the price

What affects the price
Scope of the workReplacing a fixture is small and adding a bathroom is large.
Moving fixturesRelocating a drain or supply costs more than swapping in place.
AccessOpen framing is easier than finished walls and floors.
The fixtures you chooseQuality and features vary widely.
Permit and inspectionReview adds a step to the schedule.

You receive a clear price before we start, and we tell you which parts of the project the plumbing depends on, such as framing or tile.

Rough in and finish: the two stages

Most plumbing projects happen in two stages. The rough in comes first, while walls and floors are open, and covers drain lines, vents and supply piping. It is inspected before it is covered.

The finish stage comes after drywall and tile. We set the fixtures, connect them to the rough in lines, test everything under normal use and show you each shutoff. Planning both stages together keeps the schedule steady and avoids cutting finished surfaces.

Fixtures that are worth planning early

Some choices have to be made before the plumber arrives. A freestanding tub, a wall mounted faucet or a large shower with multiple heads all need the right supply and drain locations before framing is closed.

Bringing us the fixture specifications early lets us match pipe sizes to what the fixtures need. It also helps to confirm the water pressure and the capacity of your water heater, because a new shower system can ask more of both than the old one did.

Related services

For failing pipes, see repiping. For fixture problems, see toilet repair and installation. We install in Marlboro, Freehold Township and Colts Neck.

Frequently asked questions

Early. Plumbing choices affect framing and cabinet layouts, so a visit before design is finalized saves rework.

Often yes. The drain routing decides the approach, and we explain whether a slab cut or an ejector pump fits.

Permit rules vary, so ask the Marlboro Township Construction Division at (732) 536-0200, extension 1800.

Yes. We install customer supplied fixtures, and we check that they fit your supply and drain.

Leave the building and call your gas utility or 911 from outside.

Often yes. The drain slope and venting decide whether it is simple or needs more work.

Service area

Our Marlboro service area

Call 24/7: (732) 466-1098