When a drain keeps clogging no matter how many times it is cabled, the problem is usually a coating on the pipe wall that a cable only punches through. Emergency hydro jetting uses a high pressure water hose and a special nozzle to scour grease, scale and silt off the inside of the pipe, and we can bring it to your Marlboro property when a line is packed solid.
This is the page to read if your kitchen line, laundry line or main drain has been cleared several times and keeps coming back.
Backed up again? Why jetting beats another cabling
- The drain flows for a week or two after cleaning and then slows again.
- A cable comes out with grease, soap film or thick sludge on it.
- The line is a large one, such as a main or a laundry stack, and a cable leaves a narrow channel.
- A camera shows a pipe wall lined with buildup rather than one clear blockage.
How the process works
A jetting hose is fed into the line through a cleanout, and the nozzle fires water backward and sideways as it advances. The spray cuts the buildup free and flushes it toward the sewer, which is why the pipe ends up looking close to new on camera.
We usually look with a camera first. That shows whether the pipe is sound enough for pressure, and it lets us show you the before and after on the monitor.
Jetting is not right for every line. A cracked or collapsed pipe can be damaged by high pressure, and a heavy root mass may need a cutting head first. We tell you honestly when a repair from our sewer line repair service makes more sense than more cleaning.
Where jetting helps in Marlboro
Homes built during the 1980s and early 1990s boom often have long kitchen runs and several bathrooms feeding a single main. After decades of use, those lines carry a layer of grease and mineral film that cabling only tunnels through.
Restaurants and shops along Route 9 and Route 79 face the same problem faster, because commercial kitchens send far more grease down the line. We handle these through commercial plumbing calls as well.
| Cable machine | Hydro jetting | |
|---|---|---|
| Best for | A single blockage | Grease, scale and repeat clogs |
| Pipe wall afterward | Channel cut through buildup | Wall scoured clean |
| How long relief lasts | Can be short if buildup remains | Usually longer, depending on what goes down the drain |
| Camera first | Sometimes | Recommended |
Line packed or clogging again and again?
Call us and we will tell you whether a cable or a jetter is the right next step.
What affects the price of jetting
You hear the price before the hose goes in. If the camera shows damage that changes the plan, we stop and walk you through it.
Related services in your area
Start with drain cleaning if the clog is simple. For a repeat problem, a sewer inspection shows the pipe from the inside. We bring jetting to Marlboro, Holmdel and Colts Neck.
Frequently asked questions
Yes. Call (732) 466-1098 at any hour. If a main line is packed solid, we will arrange the equipment and a plumber for the earliest appointment we can offer.
It depends on the pipe. We look with a camera first, and if the pipe is cracked or fragile, we recommend repair rather than pressure.
Snaking pushes a cable through a blockage. Jetting uses water at high pressure to clean the whole pipe wall, so it removes the layer that causes repeat clogs.
Water can remove light roots, but a thick root mass usually needs a cutting head first. A camera tells us which approach is needed.
Yes. When we use a camera, you can watch the monitor before and after the pass.
There is no fixed schedule. A line that has stayed clear for years does not need it, while a line that clogs every few months may benefit from a scouring.